| Model |
DM-2B-40-RZL |
DM-2B-50-RZL |
DM-2B-60-RZL |
DM-2B-80-RZL |
DM-2B-100-RZL |
DM-2B-120-RZL |
|
| Evaporative Temperature |
-15º C~-50ºC |
Compressor
Model |
HSN5343-20 |
HSN5353-25 |
HSN5363-30 |
HSN6451-40 |
HSN6461-50 |
HSN7451-60 |
Number of
Compressor |
2 |
2 |
2 |
2 |
2 |
2 |
Coolng
Capacity(KW) |
110 |
128.4 |
146.6 |
177 |
202.6 |
251.8 |
| Power(KW) |
47.6 |
54.4 |
61.6 |
69.2 |
85 |
100 |
Suction Pipe
interface |
76 |
76 |
76 |
76 |
76 |
89 |
Exhaust pipe
interface |
57 |
57 |
57 |
57 |
57 |
76 |
| Outlet interfac |
28 |
45 |
45 |
57 |
57 |
57 |
| Inlet pipe interface |
35 |
35 |
35 |
35 |
35 |
76 |
| Length |
2200 |
2200 |
2400 |
2700 |
2700 |
3200 |
| Width |
1250 |
1250 |
1250 |
1250 |
1250 |
1550 |
| Height |
2000 |
2000 |
2000 |
2125 |
2125 |
2125 |
Parallel compressor unit is mostly used to work together with cold rooms, walk in freezers, spiral freezers, tunnel freezers, plate freezers or other refrigeration projects. The compressors quantity on unit can be 2, 3, 4, 5, 6 or more. We use compressors mostly and other compressor brands will be also available according to customers requirement.
Screw Compressor Unit:
High-temperature Type: Evaporating temperature of 12.5°C~-10, and the nominal power of compressor motor is from 60HP to 600HP.
Intermediate-temperature Type: Evaporating temperature of -15°C~-30°C, and the nominal power of compressor motor is from 50HP to 540HP.
Low-temperature Type: Evaporating temperature of -35°C~-45°C, and the nominal power of compressor motor is from 50HP to 540HP.
Standard configuration of screw type parallel compressor refrigeration unit:
1.Low-temp type: screw compressor, liquid receiver, gauge panel,high and low pressure controller, electric cabinet, oil separator, water-cooling type oil cooler, economizer, liquid supply filter,suction line filter,injection components.
2.High-temp type: screw compressor, liquid receiver,gauge panel, high and low pressure controller, electric cabinet, oil separator,spray liquid cooling system, liquid supply filter,suction line filter.
1. Utilized Semi-Hermetic Refrigeration Compressors; Good Quality and Reliable Performance;
2. The products feature by their structures of muti semi-hermetic Compressors paralleled together to from one integrated systems. The discharge pipes, suction pipes are one shared by all the compressors for each units. The paralleled system is simpler for intergrated control and cap adjustment;
3. Structure is compacted to save installation space;
4. According to the change of cooling load,the multilevel energy regulation can be realized and also can reduce the equipment running cost.
5. Reduce the influence on operation that caused by machine failure so as to increase the realibity of the unit operation.
6. R404a, R22 units can be provided.
Temperature: -5~-5ºCand -25~-40 ºC
Horsepower: 50HP ~ 375HP
Compressor type: Semi-hermetic screw
Cooling mode: air cooling, water cooling
Voltage: 380V/3Ph/50Hz,other kinds of power supply is optional
Refrigerant: R404A, R507A, R22
1. Framework
2. Compressor
3. Oil system (include oil heater, oil separator, oil receiver, oil pressure difference check valve, oil level controller)
4. Electrical control system (separated wire circle start function should be requested by customer)
5. Protecting fittings (compressor high pressure controller, system high & low pressure controller, oil pressure switch)
6. High / low pressure meter.
7. Liquid receiver (with stop valve, liquid system filter, sight glass)
8. Gas & liquid separator.
--Compressor: semi-hermetic compressors, splash-type, centrifugal motor
--Constitutional protection device with motor protection, motor protection, customs and built-in safety valves
--Equipped with electric control box, it can display various operating parameters and alarm messages and communicate with the centralized control system. Through the interface, the operating status of the unit is returned.
--Oil divider with heater and oil level control
--The oil line is equipped with a clear ball valve, filter, oil level switch and oil solenoid
1. Q: Are you a manufacturer?
A:A: Yes, we are manufacturer. Non-standard customization and OEM service are both welcomed and available.
2.Q: Can I get the warranty?
A: Yes, under the condition that the user apply the equipment correctly, we provide 1 year quality warranty.
3.Q: How to pay?
A: 30% of total amount to be paid before production, and the balance payment before shipment.
4.Q: How to ship?
A: We work with experienced shipping agent who could arrange your delivery on the cheapest and fastest way. Our closest port is Ningbo/ShangHai.
5.Q: What about the delivery date?
A: 10-30 days, depends on the order.
6.Q: What about the maintenance?
A: All the products are tested before shipment, and maintenance is easy. We provide patient pre-sale service and considerate after-sale service.
7.Q: Do you have any Certificate?
A: Yes. we have ISO9001 certificate. If you need any other Certificate, we can help you to get it.
8.Q: Can I get guarantee of products?
A: Yes, every cold room is 10 years quality warrantee under customer correct using the products.
9.Q:How long is the lead time?
A:Usually for units we need 35 days to produce. If it is a special voltage of 60hz, the production time needs to be extended by 5-10 days. Panels and other things usually we need 7-20 days depends on amount.
Audited Supplier 
){kind=link}