Condenser Coil Evaporative Condenser for Ammonia or Freon Cooling System

• Customization: Available
• Condensation Forms: Evaporative Cooling
• Refrigerant: R22, R134A
• Model NO.: LNZ1200
• Type: Evaporative Condenser
• Structural Form: Vertical
• Heat Transfer Mode: Water Circulating
• Form: Heat Transler Tube
• Application Field: Large Cold Storage
• Certification: ISO
• Condition: New
• Bottom Mounting Hole Diameter: 19mm
• Makeup Pressure: 140~340PA
• Color: Gery
• Power Supply: 220V
• Transport Package: Wooden Box
• Specification: >4420kw
• Trademark: DM
• Origin: Made in China
• HS Code: 8418991000
• Production Capacity: 5000000000pieces/Year
• Package Size: 500.00cm * 500.00cm * 500.00cm
• Package Gross Weight: 100.000kg

Product Description

Product Advantages

Electronic Water-Curing Device

The electronic water - curing device is very advanced and works under 220V power supply . It can help the condenser to antiscale , descale , sterilize and eliminate alga , activating the circular cooling water .

Rance of services
Our products are widely applied to electricity generating stations , metallurgy , petrochemical industry , motor-dom , textile , hotels , food industry , tobacco industry , pharmaceuticals industry , electronic industry and papermaking .

Convenient transportation and installation
MKS series products adopt on-site installation , which makes transportation and installation easy .

Condensing Coils
The condensing coils are made of high - quality seamless steel pipes with thickness of ϕ25mm.( GB /T8163) The design pressure is 1.97Mpa. All the coils have been pneumatically tested 3 times at 2.5Mpa to avoid leakage . The coils are galvanized to avoid being rotten . The slope of coils helps the discharge of liquid . The differential pressure of the coil is small .

Water Circulating Pump
Circulation pump with no steering quality mechanical limit seal , no leakage , Long service life . And the special outdoor type motor , imported bearing special configuration Card machine pump long-term reliable operation , has low power , high flow , low noise , of Excellent performance characteristics .

For example:
1) Operating condition : condensing temperature =36ºC, wet bulb temperature =29ºC.
2) The total amount of heat rejection discharged by the ammonia cooling system is 940KW.( The refrigerating capacity of compressor + the power of compressor ' s crankshaft = the total amount of heat rejection )
3) Look up Graph 2 and find out the heat rejection correction index is 1.35.
4) Calculate the actual load of the condenser :940KWx1.35=1269KW.
5) Look up Graph 1 and choose Evaporative Condenser Type MKS -1285B Its heat rejection >1269KW.

Instruction for choosing a type

1)Make sure of the operating condition , condensing temperature and wet bulb temperature .
2) Figure out the total amount of heat rejection discharged by the system to the condenser .
3) Look up Graph 2 or Graph 3 to choose the heat rejection correction index .
4) The total amount of heat rejection multiplies the correction index equals the condensation load when operating .
5) Look up Graph 1 to choose a type . The heat rejection of the chosen type should no less than the corrected heat rejection .
 

 

Parameter table

Heat Rejection Correction Index for R717
Condensing Temperature	(ºC) Air inlet wet bulb temperature
(ºC)	10	12	14	16	17	18	19	20	21	22	23	24	25	26	27	28	29	30
29	0.72	0.78	0.86	0.96	1.01	1.09	1.18	1.30	1.43	1.60	1.84	2.16	2.66	/	/	/	/	/
30	0.68	0.73	0.81	0.88	0.94	1.00	1.07	1.15	1.27	1.40	1.59	1.79	2.13	/	/	/	/	/
31	0.64	0.68	0.74	0.82	0.86	0.91	0.97	1.04	1.12	1.22	1.36	1.52	1.74	2.06	/	/	/	/
32	0.61	0.65	0.69	0.74	0.80	0.84	0.89	0.95	1.02	1.10	1.20	1.34	1.49	1.70	2.02	/	/	/
33	0.57	0.61	0.65	0.70	0.73	0.78	0.82	0.87	0.92	0.99	1.07	1.16	1.29	1.45	1.66	1.96	/	/
34	0.55	0.58	0.62	0.66	0.69	0.72	0.76	0.80	0.85	0.90	0.96	1.04	1.14	1.27	1.42	1.63	1.90	/
35	0.52	0.54	0.58	0.62	0.64	0.67	0.70	0.73	0.78	0.83	0.88	0.94	1.02	1.11	1.23	1.37	1.59	1.85
36	0.50	0.52	0.55	0.59	0.61	0.63	0.66	0.69	0.72	0.75	0.81	0.86	0.92	1.00	1.09	1.22	1.35	1.57
37	0.47	0.49	0.52	0.55	0.57	0.59	0.61	0.64	0.67	0.70	0.73	0.79	0.84	0.90	0.97	1.06	1.21	1.33
38	0.45	0.47	0.50	0.53	0.55	0.56	0.58	0.60	0.62	0.65	0.68	0.72	0.76	0.82	0.88	0.96	1.04	1.19
39	0.43	0.45	0.47	0.50	0.52	0.53	0.54	0.56	0.58	0.61	0.63	0.67	0.70	0.74	0.80	0.86	0.95	1.04
40	0.42	0.43	0.45	0.48	0.49	0.50	0.52	0.53	0.55	0.58	0.60	0.62	0.66	0.69	0.73	0.78	0.85	0.93
41	0.40	0.41	0.43	0.45	0.46	0.47	0.49	0.50	0.52	0.54	0.56	0.58	0.61	0.64	0.67	0.71	0.76	0.83
42	0.39	0.40	0.41	0.43	0.44	0.45	0.47	0.48	0.49	0.51	0.53	0.55	0.57	0.60	0.62	0.66	0.70	0.74
43	0.37	0.38	0.39	0.41	0.42	0.43	0.44	0.45	0.46	0.48	0.50	0.51	0.53	0.55	0.58	0.61	0.65	0.69
44	0.36	0.37	0.38	0.39	0.40	0.41	0.42	0.43	0.44	0.46	0.47	0.49	0.50	0.52	0.54	0.57	0.60	0.63
45	0.34	0.35	0.36	0.37	0.38	0.39	0.40	0.41	0.42	0.43	0.44	0.46	0.47	0.49	0.51	0.53	0.56	0.58

Model	Axial fan				Weight (kg)	Water pump			Supplement water (m^3/h)	Supplement water pressure (MPa)	Design working condition			Design heat radiation (Kw)
	Rated power (Kw)	Rated current (A)	Air flow (10^4m^3/h)	Set	Operation	Rated power (Kw)	Rated current (A)	Water  circulation (m^3/h)			Temp.°C		Design  pressure (MPa)
											Dry ball	Wet ball
LNZ240	0.75	2.6	1.2	2	2450	1.1	2.7	40	0.2-0.73	0.25	35	24	2.0	240
LNZ350	1.5	4.4	1.8	2	3310	1.5	3.7	50	0.3-1.06					350
LNZ450	3	9	4.5	1	4420	1.5	3.7	75	0.39-1.37					450
LNZ600	4	12.5	6	1	5230	1.5	3.7	75	0.52-1.83					600
LNZ750	2.2	9	3.8	2	5760	2.2	5.0	100	0.64-2.29					750
LNZ900	3	9	4.5	2	6760	4	8.8	120	0.77-2.74					900
LNZ1000	3	9.6	5	2	7670	4	8.8	160	0.86-3.05					1000
LNZ1200	4	12.5	6	2	8560	4	8.8	160	1.02-4.56					1200
LNZ1500	5.5	16.7	7.5	2	9710	5.5	11.6	195	1.27-3.56					1500
LNZ1800	5.5	18.5	9	2	12190	7.5	15.4	260	1.54-5.48					1800
ZNX2000	7.5	24.7	10	2	13820	7.5	15.4	260	1.7-6.08					2000
ZNX2400	7.5	24.7	12	2	15490	11	22.6	310	1.72-6.1					2400
ZNX2800	11	36.2	14	2	17290	15	30.9	350	2.08-8.55					2800
ZNX3200	15	35	16	2	18430	15	30.9	400	2.68-9.75					3200
ZNX4000	7.5	24.7	10	4	27640	7.5*2	15.4	520	3.4-12.16					4000
ZNX4800	7.5	24.7	12	4	30980	11*2	22.6	620	4.04-13.66					4800
ZNX5600	11	36.2	14	4	35250	15*2	30.9	700	4.72-17.1					5600
ZNX6400	15	354	16	4	36860	15*2	30.9	800	5.36-19.5					6400
ZNX8000	7.5	24.7	10	8	56360	7.5*4	15.4	1040	6.8-24.32					8000
ZNX9600	7.5	24.7	12	8	63160	11*4	22.6	1240	8.08-29.32					9600
ZNX11200	11	36.2	14	8	70440	15*4	30.9	1400	9.44-34.2					11200
ZNX12800	15	36	16	8	73720	15*4	30.9	1600	10.72-39.1					12800

Company Profile

Zhejiang Damai Refrigeration Technology Co., Ltd is located in Shaoxin,Zhejiang.Damai is a company specializing in refrigeration and air conditioning equipment.Our main equipment is Cold room,Evaporator,Condenser Condensing unit ,Compressor,Cold room panel/door and so on.We have more than ten years of experience in the field of cold storage, with high-quality technology and professional product knowledge.We are able to provide consumers with professional and high-quality technical services.The quality of our products can be guaranteed.

Our Advantages

Why choose our company ?
1.Because our company has CAC official .
2.We have a good one-year after-sales service.
3.We have over 20 years of sales experience. 
4.We have our own factory.
5.We will try our best to provide a professional response as soon as possible.

Product advantages
1.Quite operation.
2.Seamless connection.
3.Easy installation
4.Beautiful and elegant placement of circuit devices.
5.Using the best equipment.
6.Not easily damaged

FAQ

Q: Are you trading company or manufacturer? 
A: We are professional manufacturer specialized in orthopedic and sport products. And we trade our products with our clients directly.
Q: How many different types of products your company manufactures?A: Now we have more than 1,000 products. We have a strong advantage of OEM, just give us the actual products or your idea that you want, we will manufacture for you.
Q: What's your MOQ?
A: If we have the products in stock, it will be no MOQ. If we need to produce, we can discuss the MOQ according to customer's exact situation.
Q: Visting factory is allowed or not?
A: Yes, we welcome customers visiting our factory. Our factory is located Shaoxin city,Zhejiang province,China mainland.

After Sales Service

Pre-sales: We provide assistance to our customers, provide valid information according to the requirements of our guests, answer questions, leave a professional impression, and lay the foundation for future sales.

Selling: let our customers know more about our products, and enthusiastically answering questions for customers and providing customers with a pleasant buying experience.

After-sales: After the products are sold, the professionals provide training services, check and maintain the products regularly, if there is problems for the quality,Will solve it for customers in time.

 

If you are interested in our products, please contact us as soon as possible.