Energy-Saving Finned Tube Evaporator Aluminum Pipe Strip of Cold Storage Room Ceiling

• Customization: Available
• After-sales Service: 1year
• Warranty: 1year
• Model NO.: DM-LP-01
• Type: Industrial Aluminium Profile
• Shape: Regular Arrangement
• Grade: 1000 Series
• Temper: T351-T851
• Window & Door Aluminium Profile: 70 Series
• Alloy: Alloy
• Surface Finishing: Smooth
• Alloying Ingredient: 6063
• Certification: ISO
• Polished Aluminum Profile: Mechanical Polishing
• Category: Aluminum Strip
• Installation: Manual Install
• Panel Materials: Aluminum
• Thickness (mm): Customized
• Applicable Environment: Cold Storage, Low Temperature Processing Workshop.
• Transport Package: Wooden Box
• Specification: customized
• Trademark: damai
• Origin: Made in China
• HS Code: 8303000000
• Production Capacity: 5000000000pieces/Year
• Package Size: 350.00cm * 70.00cm * 70.00cm
• Package Gross Weight: 400.000kg

Product Description

Cold storage aluminum strip

Product Description

Overview:
The aluminum row (aluminum alloy wing tube evaporator) is a die-casting structure that integrates wings and tubes. It is mainly used in the refrigeration system of 20 ºC to -45 ºC cold storage, and is an ideal evaporator for various types of food freezing and cold storage.

Feature:
1. Electric defrosting function: Select long life, high temperature resistance, and high insulation level electric heating wires, and equipped with a water sink to end the problem of difficult defrosting of cold exhaust pipes.
2. High pressure resistance of the exhaust pipe: The aluminum wing and tube are formed by one-time die-casting, and the strength of the wing and aluminum tube is mutually improved. The pressure resistance of the aluminum tube is also greatly improved, and it has undergone a 2.5 airtight inspection before leaving the factory. When conducting a 4.5 pressure life test, the aluminum exhaust pipe is safe and sound.
3. The system is clean and extends the service life of the compressor: the inside of the pipe is specially treated to ensure the cleanliness of the aluminum row. Adopting aluminum alloy grades with strong corrosion resistance, the surface undergoes special process treatment, with a service life of over 20 years, and meets food hygiene standards.
4. The dual use of refrigerant fluorine and ammonia has expanded the scope of use.
 

Calculation of evaporation area:

The outer circumference of the wing tube is 0.3 meters, and the total length of the wing tube multiplied by the outer circumference of the wing tube is the evaporation area. As for Model 7, the total length of the pipes is 12, with a length of 2 meters (pipe length) of 24 meters, 0.3 meters and 7.2 meters

 

 

 

Product Advantages

The use of products is quite common, so what are the advantages of using this product?

1. Excellent energy-saving effect: with five major advantages:
(1) Good thermal conductivity: Aluminum alloy has excellent thermal conductivity, which reduces the evaporation temperature of the refrigerant and the temperature difference on the outer surface of the aluminum exhaust, increases the evaporation temperature, increases the energy efficiency ratio of the compressor, and reduces energy consumption
(2) Special structure: The wings of the aluminum alloy wing tube are parallel to the aluminum tube, forming a sheet-like shape. The formed aluminum row fixes the sheet-like wing tube in parallel, forming several parallel channels. When the refrigeration system works, the cold air forms a flue effect in the channel, which is accelerated to sink and accelerate convection. Therefore, the cooling speed is fast. When the set temperature is reached, the compressor stops running, saving a lot of electricity;
(3) Set up well, high efficiency: The ratio of the projected area to the evaporation area of the aluminum row can be one to three or one to four, so that all the aluminum rows can be installed on the top surface of the cold storage. This way, firstly, the heat exchange capacity per unit area can be higher and more energy-efficient than using wall rows. Secondly, it has a certain cold storage effect, reducing the frequent startup rate of the compressor during operation, and saving a certain amount of electrical energy consumption;
(4) Lightweight and easy to install: The weight of the aluminum strip is proportional to the area of the evaporator Ф About one sixth of the 38 steel pipes are easy to install, which can save a lot of structural investment and energy consumption in the production structure;
(5) Low refrigerant consumption: The wing tube used in the aluminum row is an outer wing with internal thread structure, which greatly reduces the amount of refrigerant charged, saving refrigerant costs and energy consumption during refrigerant production.

Company Profile

Zhejiang Damai Refrigeration Technology Co.,Ltd is located in Shaoxin,Zhejiang.Damai is a company specializing in refrigeration and refrigeration equipment.We pride ourselves on quality, service and pricing, and believe that all three areas are equally important to ensure the long-term success of your overseas purchasing program. Our sustained relationship with customers serves as testimonial for our high quality products. The fusion of superior quality and reasonable prices make our products capable of influencing anyone in the whole world. Our reputation in the market is synonymous with high quality, updated technology and dedicated approach.

Why choose our company ?
1.Because our company has CAC official .
2.We have a good one-year after-sales service.
3.We have over 20 years of sales experience. 
4.We have our own factory.
5.We will try our best to provide a professional response as soon as possible.
Product advantages

1.Quite operation.

2.Seamless connection.

3.Easy installation

4.Beautiful and elegant placement of circuit devices.

5.Using the best equipment.

6.Not easily damaged

FAQ

Q: Are you trading company or manufacturer? 

A: We are professional manufacturer specialized in orthopedic and sport products. And we trade our products with our clients directly.
Q: How many different types of products your company manufactures?
A: Now we have more than 1,000 products. We have a strong advantage of OEM, just give us the actual products or your idea that you want, we will manufacture for you.
Q: What's your MOQ?
A: If we have the products in stock, it will be no MOQ. If we need to produce, we can discuss the MOQ according to customer's exact situation.
Q: Visting factory is allowed or not?
A: Yes, we welcome customers visiting our factory. Our factory is located Shaoxin city,Zhejiang province,China mainland.

After Sales Service

Pre-sales: We provide assistance to our customers, provide valid information according to the requirements of our guests, answer questions, leave a professional impression, and lay the foundation for future sales.

Selling: let our customers know more about our products, and enthusiastically answering questions for customers and providing customers with a pleasant buying experience.

After-sales: After the products are sold, the professionals provide training services, check and maintain the products regularly, if there is problems for the quality,Will solve it for customers in time.
 

If you are interested in our products, please  us as soon as possible.