Refrigeration Two Steps Pneumatic Shut off Gas Powered Stop Valves of Cooling System Raxk

• Media: Ammonia, Fluorine, Propane, Propylene, etc
• Temperature: -50c to +120c
• Actuator: Manual
• Material: Carbon Steel
• Structure: Angle Type Globe Valve
• Application: Refrigeration Valve
• Model NO.: DM-QDF-01
• Standard: DIN, GB, ANSI
• Nominal Pressure: 2.8MPa
• Test Pressure: 4.2MPa
• Transport Package: Wooden Case
• Specification: grey
• Trademark: DM
• Origin: Made in China
• HS Code: 8481804090
• Production Capacity: 5000000000pieces/Year

Product Description

Two Steps Gas Powered Stop Valves RAXK 

Product Description

Nominal pressure:
2.8MPa

Test pressure:
4.2MPa

Applicable temperature:
-50'c - +120'c

Applicable medium:
ammonis, fuorine. propaneeto

RALK is a two-step normally closed but pneumatically open pilot valve. The refrigeration gas from the external high-pressure pipe acts on the piston, thereby controlling the pneumatic regulating valve. The opening principle of the two-step pneumatic valve is as follows

Step 1: When the pilot valve coil is powered on, the valve only opens 10% of the entire valve
Step 2: When the pressure difference between the inlet and outlet of the valve reaches 1-1.5ar, the valve will automatically
Move 100% full open

Like the RALK valve, there is an external interface installed on the valve cover of the RAXK, nut and interface connected to high-pressure gas, and two AEVM electromagnetic pilot valves, one is the AEVM-NC (normally closed pilot valve) in position A, and the other is the AEVM-NO in position B

 

The solenoid valve A closes and opens the gas entering the top chamber of the piston, thereby closing or opening the main valve. However, solenoid valve B must be opened when solenoid valve A is closed, causing gas leakage in the chamber, allowing the main valve to close again

The design of the pneumatic valve RAXK is suitable for ammonia and other commonly used Freon refrigerants, used for opening valves in return steam pipes with large pressure differences, and for situations where the valve still needs to automatically close when the external pipe pressure is equal to or less than the inlet pressure.
 

  

 

Parameter table

Name	Type	Size (mm)								kV	Cv
		DN		ΦD	Φd	A	H	L	L1
RAXK Two-step Pneumnatic stop valve	RAXK 25	1"	25	34	25	65	190	190	125	9	10.5
	RAXK 32	1 1/4"	32	42	32	70	215	245	170	16	19
	RAXK 40	1 1/2"	40	48	40	70	215	245	170	30	35
	RAXK 50	2"	50	60	50	70	220	255	180	40	47
	RAXK 65	2 1/2"	65	76	65	85	245	295	220	75	88
	RAXK 80	3"	80	89	80	95	265	330	250	140	164
	RAXK 100	4"	100	108	100	125	300	415	330	200	234

  

 

Our Advantages

Zhejiang Damai Refrigeration Technology Co., Ltd is located in Shaoxin,Zhejiang.Damai is a company specializing in refrigeration and air conditioning equipment.Our main equipment is Cold room,Evaporator,Condenser,Condensing unit,Compressor,Cold room panel/door and so on.We have more than ten years of experience in the field of cold storage, with high-quality technology and professional product knowledge.We are able to provide consumers with professional and high-quality technical services.The quality of our products can be guaranteed.

Why choose our company ?
1.Because our company has CAC official .
2.We have a good one-year after-sales service.
3.We have over 20 years of sales experience. 
4.We have our own factory.
5.We will try our best to provide a professional response as soon as possible.

Product advantages
1.Quite operation.
2.Seamless connection.
3.Easy installation
4.Beautiful and elegant placement of circuit devices.
5.Using the best equipment.
6.Not easily damaged

FAQ

Q: Are you trading company or manufacturer? 
A: We are professional manufacturer specialized in orthopedic and sport products. And we trade our products with our clients directly.
Q: How many different types of products your company manufactures?A: Now we have more than 1,000 products. We have a strong advantage of OEM, just give us the actual products or your idea that you want, we will manufacture for you.
Q: What's your MOQ?
A: If we have the products in stock, it will be no MOQ. If we need to produce, we can discuss the MOQ according to customer's exact situation.
Q: Visting factory is allowed or not?
A: Yes, we welcome customers visiting our factory. Our factory is located Shaoxin city,Zhejiang province,China mainland.

After Sales Service

Pre-sales:
We provide assistance to our customers, provide valid information according to the requirements of our guests, answer questions, leave a professional impression, and lay the foundation for future sales.

Selling:
let our customers know more about our products, and enthusiastically answering questions for customers and providing customers with a pleasant buying experience.

After-sales:
After the products are sold, the professionals provide training services, check and maintain the products regularly, if there is problems for the quality,Will solve it for customers in time.

If you are interested in our products, please contact us as soon as possible.